VuPlex® was designed for use within the demanding aviation industry and delivers a fast, safe, and effective solution to plastic maintenance. The ingredients in VuPlex® have been specifically selected and tested to deliver fast quality results with the minimum of effort and fuss. Some cleaners use abrasives to remove dirt and scratches. This not only introduces more scratches to the surface but over time weakens the plastic through constant plastic removal. VuPlex® works in reverse to this process by penetrating the dirt and grime in the surface and adding a fine layer of filling material that leaves the surface protected and adds a lustrous finish to clear and coloured plastics and makes plastic paints gleam like new.
A preventative as much as a cure!
VuPlex® is a preventative as much as a cure. If VuPlex® is applied when plastic is new, it protects the surface from premature aging. If the surface is already damaged with fine scratches and in-ground grime, VuPlex® will restore the surface and clarity, leaving a finish that is polished and protected.
Plastic
Convenient, versatile, lightweight and allows flexibility of design, all characteristics of the modern day miracle we know as plastic. Plastic materials have worked their way into every aspect of our lives and will continue to do so even more into the future as chemists invent new applications. Although plastic has many advantages, the main set back of the material is its vulnerabilities when it comes to cleaning and maintaining. This is particularly relevant when it comes to clear plastics where fine surface scratching and dirt accumulation cause a breakdown in clarity.
How it Works
The product works using five functions in one quick action. It cleans using safe ingredients that wont damage plastic surfaces. It applies a fine coating of wax that gives the surface protection from micro scratching. The wax acts as a barrier against water (hydrophobic) and other atmospheric conditions that cause aging and a break down of clarity. Static that is built up in the plastic surface and attracts other abrasive material such as dust, is controlled by VuPlexs anti-static properties. VuPlex polishes to a high shine and restores the lustre and new look to the surface. The finish is not sticky or greasy and can be achieved in mere seconds.
FAQ
How long does it last? A . This is dependent on the environment that the application is used in. If VuPlex is applied indoors, it will last much longer than an outdoor application. The average outdoor durability would be approximately three (3) months or if the clarity or shine is starting to be lost, just re-apply.
How long does the can go? A. Approximate can coverage:-
375g = 30 m2 200g = 16 m2 50g = 5 m2
Does VuPlex contain silicone? A. Yes, but only small amounts and it is not the curing type that binds to the surface.
Can you use this product on the outside of a car windscreen? A. Yes you are able to use it on the outside windscreen and it is very efficient in making sand pitting less visible and acting similar to other water dispersant products, however, we don't recommend this application due to the windscreen wipers "chattering" across the surface of the windscreen possibly impeding clarity of vision.
FOR MY MARINE CRAFT
Can I use VuPlex on gelcoat? A. Yes you can if the gelcoat is in reasonable condition. If it's too badly faded, you will need to use a cutting compound first to remove any heavy oxidization.
Does VuPlex stop salt form sticking to my clears on my boat? A. Yes, VuPlex seals the surface of plastic and makes water beads slide right off. When the water dries as a bead, the residual salt crystal doesn't stick to the surface and is easily removed with fresh water.
What makes my acrylic widows and flexible clears (insulglass) go milky and opaque? A. Acrylic material (Perspex, Plexiglas) is very easily scratched, particularly in marine environments where sand and dried salt crystals quickly abrade the surface if not cleaned correctly. In addition to this salt can hide in the scratches and pores of the plastic. When this salt dries coupled with micro-scratching , it accumulates and creates an opaque appearance.
Clear PVC (clears or insulglass) used for bimini tops, dodgers, fly bridges also falls fate to salt impregnation. Clear flexible PVC is very porous and over time accumulates salt, creating an unsafe opaque look. Also if Clear PVC is immersed in water for any length of time, it will absorb moisture that will cause bad fogging. This can be solved by drying in the sun for a day or so.
How does VuPlex work to make plastic windows so clear again? A. VuPlex works on boat windows in 4 ways.
Cleans the salt and other contaminates away from the pores and scratches using safe chemicals that won't harm the plastic.
Removes static that attracts dust, dirt and abrasives to the surface.
Deposits a waterproof polymer film that also repels water and salt.
Increases scratch resistance by increasing surface slip.
Can I use VuPlex on my depth finder and fish finder screens? A. Yes, this is a perfect application. VuPlex helps protect the screen form scratching and maintains maximum vision to the information.
Can I use VuPlex on my instrument fascias and high gloss wood veneers? A. Yes another great application.
What about vinyl seat material? A. Yes, it cleans this as well.
Will VuPlex remove squid ink? A. No, squid ink is extremely difficult to remove.
Will VuPlex remove mould from my clears? A. Yes, if the mould has not pitted the surface of the clears too badly.
Will it clean the top side roof of my Biminis top? A. No it is not recommended for this application.
Is VuPlex safe to leave on board my boat? A. Yes, the can is specifically designed to withstand the marine environment. It will not rust or corrode.
